品牌PICOTEST/台湾仪鼎

　　PICOTEST仪鼎仪器专业测试讯号转换器

　　 J2111A / J2112A 

　　J2111A 

　　Solid State Current Injector

　　J2112A 

　　High Current Injector  

　　     可配合通用輸入型的高PSRR 低噪音穩壓器(J2170A)使用20nSec典型的上升和下降時間DC~40MHz可用的範圍 (interconnection dependent)提供選擇開關,可雙極性(source or sink)操作內建偏壓電流可配合網路分析儀使用具有50Ω阻抗的精密電流量輸出(1V/1A)可與任意波形產生器、函數產生器和網路分析儀配合使用可用來測量電池阻抗J2111A- 詳細規格J2112A- 詳細規格中国台湾仪鼎J2111AS测试讯号转换器  J2111A - Product Information

　　The current injector is one of the most versatile of the injector products. Coupled with the G5100A, or other equivalent function generator, it is capable of performing small signal load steps up to 40MHz, with very fast rising and falling edges. Using the G5100A, also allows the rise and fall times to be controlled, various waveforms or even arbitrary waveforms. This can be used to simulate the effects of many different types of loads, including high speed digital circuit loading, which is often largely dynamic.

　　The current injector can also be used to measure output impedance of power supplies, voltage regulators, power buses and even batteries. It can be used to non-invasively measure the stability of a combined input filter and the negative resistance of a switching power supply. It also has application in the measurement and extraction of transistor data, including small signal current gain, Ft and many other dynamic performance parameters.

　　In RF and instrumentation circuits it can be used to provide constant current biasing for class A amplifiers and buffers.

　　Measuring Output Impedance

　　The current injector has two connections for the output, Output and GND. The input is DC+AC and can be connected to either a signal generator or a network analyzer. A built in bias current enables Class A operation for use with a network analyzer. The Current Injector and DC Bias injector can also be used for this purpose.

　　The output current is reduced 40dB from the input signal, resulting in 10mA/V scaling. The current monitor is designed to be terminated into 50 Ohms and can be used with the network analyzer, an oscilloscope or a DMM to monitor current.

　　When used in conjunction with a voltage probe, the analyzer can measure Voltage/Current, which is the impedance.中国台湾仪鼎J2111AS测试讯号转换器  J2111A - Detailed Specifications:SpecificationsCharacteristicTypicalMaximum Input Voltage DC+ACVcc-1.5VOutput VoltageVcc-2VCurrent Monitor1V / AModulator Gain10mA / VOffset Current (typical)+/-24mAUsable BandwidthDC ~ 40MHzTemperature Range0 ~ 50°CMaximum Altitude6000 Ft

　　   J2112A - Product Information

　　The J2112A Current Injector is an extremely versatile tool addition to the Picotest Signal Injector line-up. Coupled with the G5100A AWG, or other equivalent function generator, it is capable of performing small and large-signal load steps up to 40MHz, with up to 20ns rise/fall times, and with currents up to 1amp. Rise and fall times can be controlled and arbitrary waveforms can be used to drive the injector producing load current profiles of virtually any characteristic pattern. This is ideal for emulating all types of load conditions, including high speed digital circuit loading, battery discharge profiles, or spontaneous current spikes.

　　When coupled with a network analyzer, the Current Injector can be used to measure the output impedance of all types of circuits and systems including power supplies, voltage regulators, power buses, and batteries. It can be used to NON-INVASIVELY measure the stability of a combined input filter /negative resistance of a switching power supply or the phase margin of a linear or switching regulator WITHOUT the need to break the control loop.

　　It also supports applications in the measurement and extraction of transistor data, including current gain, Ft, and many other dynamic performance parameters. In RF and instrumentation circuits it can be used to provide constant current biasing for class A amplifiers and buffers.

　　PICOTEST仪鼎仪器专业测试讯号转换器

　　  J2112A SpecificationsCharacteristicTypicalMax Input Voltage DC+AC+5 VMax Output Current+1 AMin Output Current24 mAMax Output Voltage+/-10.5 V<Current Monitor0.1 V/AModulator Gain0.2 A/VOffset Current (typical)+240 mA<-3dB Bandwidth (-10dBm)DC-50 MHzTemperature Range0-50℃Maximum Altitude6000 Ft 

　　J2100A 1 hz - 5 mhz

　　J2101A  10 hz - 45 mhz

　　J2110A

　　J2120A

　　J2130A

　　J2140A

　　J2160A

　　J2180A

　　J2180A

　　J2190A